Ask The Brewmasters

Hello.

Have anyone worked with Meheen ML Bottle Labeler, 2017 model? 

When we run the labeler, the result is not quite what we expected.

The control unit does not have a way to adjust the two motors. I think the problem is that the motor who rotate the bottle runs two slow (or the other motor pulling the label through is moving too fast. Anyone had this situation with this model?

Thank you.

/mikkel

------------------------------
Mikkel Andersen
CEO
Hadsund Bryghus
Hadsund
(454) 082-6280
------------------------------

Mikkel

I had similar issues with an In-Line labeler in the past.  The operations manual does not speak to how to time your motors. It looks like it is set to run a larger diameter bottle and the label is not feeding fast enough. I would reach out to Wild Goose/Maheen and as where in the PLC the stepper motor counts are accessed. 

Good Luck

Aaron Spotswood

------------------------------
Aaron Spotswood
Head Brewer
Sky High Brewing
Corvallis OR
(541) 207-3277
------------------------------

Original Message:
Sent: 05-30-2024 04:39
From: Mikkel Andersen
Subject: Meheen ML Bottle Labeler, 2017

Hello.

Have anyone worked with Meheen ML Bottle Labeler, 2017 model? 

When we run the labeler, the result is not quite what we expected.

The control unit does not have a way to adjust the two motors. I think the problem is that the motor who rotate the bottle runs two slow (or the other motor pulling the label through is moving too fast. Anyone had this situation with this model?

Thank you.

/mikkel

------------------------------
Mikkel Andersen
CEO
Hadsund Bryghus
Hadsund
(454) 082-6280
------------------------------