Your lengthy part number appears to be for the configuration of the entire valve block, including valves, fittings and accessories included. Do you know what specific part failed (i.e. - communications block with controller, manifold, a specific valve, etc.)? If it is just the controller, that specific part may be available new or used without everything else and you just need to bolt it on and set the dip switches (if any). Also, do you have a picture of the valve block assembly as-is?
------------------------------
Glen Sprouse
President
Brewery Development & Automation, LLC
glen@brewerydoneright.com(678) 778-0212
------------------------------
Original Message:
Sent: 03-02-2026 18:57
From: Madison Roane
Subject: CFT canning line spare parts needed
We are in need of a part for our CFT canning line....
- Master C-Block24/4
- Need a Festo Valve Terminal for one of our filler controllers
- Part number: VTUG-10-VRLK-B1T-G18FD-UFD-M7SFD-AXR1AXR1AXR1AXR1AXR1AXR110N+SCVA
The part is 2 months out from CFT and a month out direct from Festo or one of their distro partners.
We have 2 on order...due to arrive early April
We've verified the 'chip' is still good.
Please contact me asap if you can help!!!!
Madison Roane
VP of Operations
Florida Avenue Brewing
Wesley Chapel FL
(813) 541-5355
------------------------------
Madison Roane
VP of Operations
Florida Avenue Brewing
Wesley Chapel FL
(813) 541-5355
------------------------------