Ask The Brewmasters

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

Hi Jacob,

Try Archon Industries in NY. I believe DME source/have sourced manway components from them, at least with the DME brewhouses I have worked on.

------------------------------
Wilson Hede
Beersmith Gastropub
Beijing, China
------------------------------

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

Original Message------

Hi Jacob,

Try Archon Industries in NY. I believe DME source/have sourced manway components from them, at least with the DME brewhouses I have worked on.

------------------------------
Wilson Hede
Beersmith Gastropub
Beijing, China
------------------------------

Thanks all, looks like Archon has the style im looking for also had a welder repair the flange and has since stopped the leaking.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

Original Message:
Sent: 11-25-2019 14:44
From: Brett Kintzer
Subject: DME Manway gasket

brewerygaskets.com also offers hundreds of styles and sizes of aftermarket manway gaskets. That would be a good place to check also.

Original Message------

Hi Jacob,

Try Archon Industries in NY. I believe DME source/have sourced manway components from them, at least with the DME brewhouses I have worked on.

------------------------------
Wilson Hede
Beersmith Gastropub
Beijing, China
------------------------------

Try BreweryGaskets.com 

------------------------------
Gary Heil
Cypress & Grove Brewing Company
Gainsville FL
(352) 318-4882
------------------------------

Original Message:
Sent: 11-22-2019 20:31
From: Wilson Hede
Subject: DME Manway gasket

Hi Jacob,

Try Archon Industries in NY. I believe DME source/have sourced manway components from them, at least with the DME brewhouses I have worked on.

------------------------------
Wilson Hede
Beersmith Gastropub
Beijing, China

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

Brewery Gaskets has always been great for me.  Go to the manway gasket section and you can filter down based on tank manufacturer, style, etc.  They even show the cross-section of the manway gasket and how to measure so you can double check against what you currently have.

https://www.brewerygaskets.com/

------------------------------
Jacob Schnabel
Owner/Head Brewer
Spilled Grain Brewhouse
Annandale, MN
------------------------------

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

Brewery Gaskets has always been great for me.  Go to the manway gasket section and you can filter down based on tank manufacturer, style, etc.  They even show the cross-section of the manway gasket and how to measure so you can double check against what you currently have.

https://www.brewerygaskets.com/

------------------------------
Jacob Schnabel
Head Brewer
Spilled Grain Brewhouse
Annandale, MN
------------------------------

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

These folks will most likely have what you're looking for and they are great to work with:

Brewery Gaskets

Brewerygaskets		remove preview
Brewery Gaskets All prices are in USD. © 2019 Brewery Gaskets. Powered by BigCommerce View this on Brewerygaskets >

Cheers,
--
Don

------------------------------
Donald Put
Head Brewer
Idyllwild Brewpub
Idyllwild CA
(951) 442-5835
------------------------------

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

brewerygaskets.com  They have just about anything you are looking for.  They can also custom make a size and gasket if they don't have one in their inventory.  We have a DME system and have gotten new Fermenter manway gaskets and Mash Tun manway gaskets from them.

------------------------------
Gregory Ouellette
Head Brewer
Martha's Exchange Rest & Brewing Co
Nashua NH
(603) 883-8781
------------------------------

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------

Hey Jacob,
Stuart Johnson is semi-local to you, we've had them do a few custom gaskets for us at a reasonable price in not too much time if you can't find a standard one. 800-558-5904
sales@stuartjohnsonco.com
https://www.stuartjohnsonco.com

Ashley Kinart-Short
Capital Brewery

------------------------------
Ashley Kinart-Short
Vice President
MBAA District-Milwaukee
mbaa.milwaukee@gmail.com
https://www.facebook.com/mbaamke 
https://www.mbaa.com/districts/Milwaukee
------------------------------

Original Message:
Sent: 11-22-2019 10:31
From: Jacob Shea
Subject: DME Manway gasket

Hi all, I've recently been experiencing wort leakage from our lauter manway due to worn out gaskets. Its circular roughly 19 3/8 in d or 49cm from the outside rim.  Does anyone know of the style and or where to source a DME compatible gasket of the like?
Thanks.

------------------------------
Jacob Shea
Lead Brewer
Ore Dock Brewing Company
Marquette MI
(906) 228-8888
------------------------------